Red Oak Fabrication offers quality turnkey fabrication services and solutions and is backed by a wide range of equipment and experienced craftsman. From advanced laser cutting to impeccable powder coating, dive into our diverse suite of services, each tailored to bring your vision to life with precision and quality.
| Specification | Hypertherm XPR300 | Hypertherm HPR400XD |
|---|---|---|
| Max Amperage | 300 A | 400 A |
| Max Material Thickness | 2.0″ | 2.0″ |
| Cutting Envelope | 10 ft × 20 ft per table | |
| Cutting Tables | (2) ALLtra dual-gantry CNC tables — 10 ft × 20 ft beds | |
| Amperage Range | 30 – 400 A across both systems | |
| Process Gases | Oxygen, nitrogen, H35 blend, compressed air | |
| Specification | Cutlite Penta FAST 4020 | BySmart Fiber 3015 | BySmart Fiber 3015 | Engineering & Output Advantage |
|---|---|---|---|---|
| Laser Resonator Power | 20,000 Watts (20 kW) IPG Photonics | 6,000 Watts (6 kW) Fiber Source | 10,000 Watts (10 kW) Fiber Source | Extreme piercing speeds and maximum plate thickness capacity. |
| Max working sheet | 4,000 mm × 2,000 mm (13.3′ × 6.7′) | 3,000 mm × 1,500 mm (10.0′ × 5.0′) | 3,000 mm × 1,500 mm (10.0′ × 5.0′) | Accommodates oversized sheet stock with maximum nest yield. |
| Drive motion system | Linear Motors with Absolute Encoders | High-Speed CNC Axis Drive | Dual-motor rack-and-pinion drive on a flying optics gantry bridge | Zero machine-zeroing downtime with friction-free 4.2G acceleration. |
| Max positioning speed | Exceeding 100 m/min | 140 m/min (Up to 5,511 IPM) | 140 m/min (Up to 5,500 IPM) | Industry-leading point-to-point positioning between cuts. |
| Cutting Head System | EVO 3 High-Power Autofocus Head | High-Precision Fiber Optical Head | Autofocus (ByPos Fiber) | Automatic focal-point adjustment for dynamic material thickness. |
| Pallet Exchange Speed | Rapid 15-Second Dual-Level Shuttle | Dual-Bed Shuttle System | Dual-Bed Shuttle System | Continuous cutting while loading and unloading finished parts. |
| Accuracy / Repeatability | ±0.03 / ±0.015 mm | High-Precision Industrial CNC | ±0.10 / ±0.05 mm | Tight tolerance blanks ready for automated robotic bending. |
| Machinery Feature | Technical Specification | Operational & Engineering Benefit |
|---|---|---|
| Laser Power Source | 4 kW Laser Resonator | Delivers clean edge cuts across thin wall to heavy wall steel. |
| Tube Diameter Range | .75″ - 12″ round material | Handles small structural tubing up to 12-inch heavy pipe. |
| Wall Thickness Range | X mm to X mm (X″ to X″) | Covers thin-wall tubing through heavy-wall structural pipe. |
| Max Material Weight | Varies dependent on lb/ft | Processes heavy structural wall thickness without feed slippage. |
| Infeed / Outfeed Length | Up to 41.0 feet | Handles full mill-length bundle stock with minimal drop scrap. |
| Multi-Axis Cutting Head | 3D Head with beveling up to 45° | Executes miter cuts, countersinks, and weld-prep bevels in one pass. |
| Workpiece Stabilization | Automated Triple-Chuck Support Drive | Eliminates vibration and chatter on long, heavy tube profiles. |
| Automation Loading | Automated Chain & Front/Rear Bundle Loaders | Supports continuous unmanned lights-out production runs. |
| Specification | ByBend80 | Xpert 80 | Xpert 320 | Xpert 320 Pro |
|---|---|---|---|---|
| Max Tonnage (US tons) | 80 | 80 | 350 | 350 |
| Max Length (bed length) | 5′ | 5′ | 13′ 6″ | 14′ 2″ |
| Max Length (between side frames) | 60″ max length part | 60″ max length part | 12′ 3″ | 12′ 3″ |
| Max Opening without Tooling | 12.5″ | 13″ | 20″ | 24″ |
| Throat | — | — | 16″ | 16″ |
Applies to all four:
| Specification | HPB-78NC |
|---|---|
| Max Tonnage (US tons) | 80 |
| Max Length (bed length) | 11.81″ |
| Max Opening without Tooling | 24″ |
| Machine Type | Model & Count | Spindle & Features | Best Use |
|---|---|---|---|
| Large-Format VMC | 1× Haas VF-10 | 50-taper, large X/Y/Z travel | Big weldments, heavy plate, large castings |
| Vertical Milling | 4× VMCs VF-3, (2) VF-5/50, DNM 5700 | CAT 50; 3- and 4-axis, high-speed spindles | Brackets, slots, pockets, surface work |
| Horizontal Milling | 2× HMCs EC-500/50, NHP 6300 | Multi-pallet, rotary tombstones | High-volume, multi-sided runs |
| Secondary Tapping | 2× FlexArm tapping arms | High-torque, air and hydraulic | Fast, clean threads off the machine — keeps spindles cutting |
Applies to all seven:
| Machine Type | Model & Count | Spindle & Features | Best Use |
|---|---|---|---|
| Bar-Fed Turning | 2× Doosan Puma 2600 | 4-ft bar feed, sub-spindle, Y-axis live tooling | Turning, cross-drilling, milling and back-work in one cycle |
| Heavy Turning | 1× Haas ST-30 | Powerful spindle, high rigidity | Larger-diameter parts, medium to large runs |
| Max turning diameter | 11″ | Dual-Spindle Y-Axis turning designed for heavy, intermittent cutting and complete part machining in a single setup. | Setup for power, rigidity, and precision. |
| Machinery Feature | Technical Specification | Operational & Engineering Benefit |
|---|---|---|
| Bed Size | 5′ × 10′ | Large-format sheet and panel work in a single setup. |
| Cutting Action | High-speed routing and profiling | Fast cycle times on soft and non-ferrous material. |
| Materials | Plastics, UHMW, HDPE, MDF, plywood, aluminium sheet, composites | Polymer and non-ferrous work without tying up a mill. |
| Typical Parts | Fixtures, panels, signs, prototypes | Shop tooling made in-house rather than bought in. |
| Spindle Power | 10HP spindle 24,000 RPM | High power versatile cutting with fast repeatable setup. |
| Equipment | Count | Detail |
|---|---|---|
| Manual welding stations | 10 | Fronius pulse |
| Robotic weld cells | 2 | Genesis Systems |
| Welding cobot | 1 | Universal Robots — 4 ft × 8 ft working area |
| AWS D1.1 certified welders | 11 | 3G certification |
| Assembly areas | 2 | Dedicated space for fabricated component assembly and customer product completion. |
| Equipment | Count | Specification |
|---|---|---|
| Manual blast booths | 2 | Clemco / GFS — 14′ × 24′ |
| Manual blast cabinet | 1 | Clemco — 4′ × 6′ with 48″ turntable |
| Automated blast cabinets | 2 | Viking 84T · Gibson 96XT |
| Equipment | Count | Specification |
|---|---|---|
| Batch powder coat lines | 3 | Overhead rail system |
| Wash booth | 1 | 3-stage chemical treat — 12′ × 24′ |
| Powder coat booth | 1 | 12′ × 24′ |
| Curing ovens | 2 | 12′ × 24′ and 15′ × 30′ |
| Burn-off oven | 1 | 7′ × 7′ × 10′ — strips racks and hooks between runs |
We reply in 1 business day. We deliver turnkey in 4–6 weeks from PO. Send us your print — we’ll take it from there.
We reply in 1 day & deliver turnkey in 4–6 weeks from PO.
